5
4
2
3
6 1
4
• Allow the appliance to cool down before you clean or store it.
• To protect yourself against an electric shock, do not immerse the cord,
plug or appliance in the water or any other liquid.
• Do not use this appliance with a damaged cord or plug or when the
appliance has malfunctions, or has been damaged in any manner.
To avoid a hazard make sure that a damaged cord or plug will be
replaced by an Competent qualied repair service(*). Do not repair this
appliance yourself.
• Unplug the appliance from the socket when you are not using it.
• Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or o.
• Do not use this appliance near direct heat sources.
• Make sure the cord does not touch the hot parts of the appliance.
• Do not use this appliance in the bathroom or near a sink lled with water.
If this appliance has fallen into the water do not under no circumstances
directly grab this appliance, but rst pull the plug from the socket.
• Only use vinegar or a dedicated product for the removal of lime scale. Never
use ammonia or any other substance that might damage your health.
• Make sure that the maximum level will never be exceeded.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
* Competent qualied repair service: after sales department of the producer
or importer or any person who is qualied, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
PARTS DESCRIPTION
1. Cover
2. On/O switch
3. Handle
4. Power indicator
5. Base
6. Button to open lid
BEFORE THE FIRST USE
• Take the appliance andaccessoriesoutthebox.Removethe
stickers,protective foilorplasticfrom thedevice.
• Putthepower cable intothe socket.(Note: Make surethe
voltagewhich is indicated on the devicematchesthe localvoltage
beforeconnecting the device.Voltage220V-240V 50/60Hz)
• Place the device on a at stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Before the rst use boil a full kettle of water to clean the kettle and
discard this water.
Instruction manual
Comments to this Manuals